Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino
  • SKU: GZMBN-1997-01-EC

Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector for Arduino

£47.10 £158.00
    DESCRIPTION
    Description: Name: Radiation Detector system; 
    Geiger tube parameters: 
    Technical parameters diameter:Φ10±0.5mm; 
    Total length: 90±2mm; 
    Starting voltage: < 350V; 
    Recommended operating voltage: 380V; 
    Minimum plateau length: 80V; 
    Maximum plateau slope: 10%/80V; 
    Extreme operating voltage: 550V; 
    The maximum count rate: 25 times / min; 
    Life: > 1 x 10^9 pulse; 
    Medium temperature: -40 ~ 55 ℃; 
    Size:108x63x20mm. 

    Features: 

    1) 5V power supply, or 1.5V 3x battery; 1.2V 4x battery, current: 30mA - 12mA. 
    2) for the detection of 20mR/h ~ 120mR/h of gamma rays and 100 ~ 1800 off
    variables / points / cm 2 of the soft beta ray.
    3) sound and light alarm. 
    4) interrupt the output interface, through this interface can be connected to the
    microcontroller and then displayed on the LCD. 
    5) Ardunio compatible. 
    6) supports most of the Geiger tube: M4011, STS-5, SBM20, J305, etc. (the
    330~600V operating voltage of the Geiger tube can be supported). 
    7) support the computer (PC) data acquisition, Matlab analysis and processing. 

    Compatible with :
    (recommended UNO R3 , or any other arbitrary with 5V and external interrupt INT). 
    Internet can be downloaded: SPI example for Radiation Logger. 
    Logger Radiation can be used as the host computer software to build radiation monitoring station.
      
    Package included: 

    1 x Assembled Radiation Detector system; 
    1 x GM Tube; 
    1 x Power supply cable; 
    1 x Battery Holder (without batteries); 
    3 x Jumper Wires; 
    4 x Nuts; 
    1 x Acrylic cover
    REVIEWS

    RELATED PRODUCTS

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP