DESCRIPTION
Features:
1. DSO Shell has similar bandwidth as DSO138 though it contains significant improvements in structure, mechanical, and operation;
2. Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers. Feedback from DSO138 users has shown that soldering on the pin-headers is often problematic for many beginners. The Analog channel is placed on a separate board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion, the mainboard is actually a general-purpose control board that can be used in many other applications. The mainboard is fully installed (except a few through-hole components) and factory tested before packing;
3. DSO Shell comes with full enclosure. The front panel and top/bottom brackets are flexible for easy user modification;
4. Rotary encoder has been added. It makes parameter adjustment much quicker and easier;
5. The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div - 20V/div while DSO138 is only 10mV/div - 5V/div;
6. DSO Shell runs on 9V (do not use power voltage higher than 10V!) power supply. Users need to prepare their own power supply since it is not included in the kits. The power jack on the mainboard accepts a standard 5.5mm/2.1mm DC plug. An alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources;
Important Notes:
It is assumed that users have adequate soldering skills and troubleshooting skills to assemble the DSO Shell kits. Buyers are advised that due to the skills of the user is involved in assembly it is not guaranteed every kit will end up being a working device. But we will make as many efforts as we can to approach that goal;
After receiving the kits users are urged to check the mainboard and LCD by applying proper power supply.
Characteristics of indicators:
Number of channel: 1;
Analog bandwidth: 0 - 200KHz;
Sensitivity: 5mV/Div - 20V/Div;
Sensitivity error: < 5%;
Resolution: 12-bit;
Input Impedance: 1M ohm;
Maximum input voltage: 50Vpk;
Coupling: DC, AC, GND;
Max real-time sampling rate: 1Msps;
Timebase: 10us/Div - 500s/Div;
Record length: 1024;
Trigger modes: Auto, Normal, Single;
Trigger types: Rising/falling edge;
Trigger position: 1/2 of buffer size fixed;
2.4-inch color TFT LCD with 320 x 240 resolution;
Power supply: 9V DC (please make sure the power supply is 9V, lower or higher than 9V will cause problems.);
Supply current: 120mA at 9V;
Dimension: 115mm x 75mm x 22mm;
Weight: 100 gram (not including cables and power supply);
Package includes:
1 x DIY 150 Digital Oscilloscope Kit (There may be a color difference);
1 x EN Instruction.
