DESCRIPTION
Description:
TECH WAVE2 is the latest 2-Channel Oscilloscope on the market, catered to hobbyists, educational institutions and professionals in the field of electronics and mechatronics. Featuring a bright and easy-to-use color touch screen display with access to many features only advance oscilloscopes offer such as built-in function generator and X-Y plotting. With an optional battery, it is portable enough to be taken wherever the jobs that need to be done is. Its an exciting project for any DIY-er, or can be purchased fully assembled for those who are looking to start using it right away. It comes with everything you need out of the box, with a micro-USB cable and two high-quality BNC probes. Enjoy and start creating!
Specifications:
Highlights of WAVE2:
Channels: 2;
Bandwidth: 0-200KHz per channel;
Sensitivity range: 5mV/DIV-20V/DIV (using x1 probe);
Maximum input voltage: 50Vpk (using x1 probe);
Maximum real time sampling rate: 1MS/s;
Time Base range 10us/DIV-500s/DIV;
X-Y Display Feature: Yes;
Function Generator Capability: Built-in 0 – 20KHz (sine) dual channel DDS function generator;
Display Resolution: 320 x 240 Color display;
Display Size: 2.4″;
Touch Display Capability: Yes;
Battery powered and portable (battery not included in DIY Kit);
General:
Touch panel operation;
Y-X mode available;
Built-in 2-channel DDS function generator;
Light weight and portable;
Vertical:
Number of Channel: 2;
Analog Bandwidth: DC-200KHz;
Sensitivity: 5mV/Div - 20V/Div (with x1 probe);
Sensitivity error: < 5%;
Resolution: 12-bit;
Input Impedance: 1M ohm / 25pF;
Maximum Input Voltage: 50Vpk;
Coupling: DC, AC;
Horizontal:
Max Real-time Sampling Rate: 1Msps (per channel);
Timebase: 10us/Div - 500s/Div;
Record Length: 1024 points;
Trigger:
Trigger Modes: Auto, Normal, Single;
Trigger Types: Rising/falling edge;
Trigger Position: 1/2 of buffer size;
Trigger Source: Ch1, Ch2, External;
Maximum external trigger voltage: 15V;
External trigger threshold;
Function Generator:
Number of channel: 2;
Waveform type: Sine, Square, Saw-tooth, Stair;
Frequency range: DC-20KHz (Sine);
Amplitude range: 0-3V (peak value);
Offset: 0V or +3.3V;
Duty Cycle: 0- 100%;
Phase: -360~360 degree;
Power Supply:
Powered on 3.7V Li-ion battery or USB;
Current consumption: ~300mA @ 3.7 – 5V;
Internal batter charger (optional);
Automatic power off on battery;
Battery running time: Appr. 3hrs (when fully charged);
Other Features:
Y-X display mode;
On-screen measurement display;
Save / recall up to 4 captures;
Serial output of captured data;
Serial port format: LVTTL, 115200bps, 8N1;
Built-in 1KHz/3.3V test signal;
Package included:
1 x WAVE2 oscilloscope DIY kit;
1 x 117 board and one 118 board;
2 x BNC x1/x10 selectable probes
