DESCRIPTION
Features: - 40gram 1s brushless Toothpick drone. - AIO Flight controller with ELRS Receiver and 5.8G VTX. - CADDX ANT 1200TVL Camera. - 1202.5 KV11500 brushless motor. - Compatible with CaddxFPV Peanut and Insta360 GO2 ( NOT Included). - Carrying Caddxfpv peanut Got 4.5 minutes flying time with 1s 650mah battery. Specifications: Item Name: 115mm F4 1S Toothpick FPV Racing Drone BNF; Wheelbase: 115mm; Size: 97mmx97mmx35mm (without propellers); Weight: 40g(without battery). Motor: Mode: EX1202.5 KV11500; Configu-ration: 9N12P; Stator Diamter: 12mm; Stator Length: 2.5mm; Shaft Diameter: Φ1.5mm; Motor Dimension(Dia.*Len): Φ14mm*14.5mm; Weight(g): 4.4g; No.of Cells(Lipo): 1S. Propellers: Gemfan 75mm; Center Thickness: 5mm; Prop Diameter: 75mm; Center Hole diameter: 1.5mm; Pitch: 0.9in. Flight controller: MCU:STM32F411CEU6 (100MHZ, 512K FLASH); Sensor: MPU6000 / ICM20689 or BMI270 (SPI connection); Original whoop size compatible; Power supply: 1S battery input (DC 2.9V-4.35V); Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready; Built-in Betaflight OSD(SPI Control); Built-in 5.8G VTX; Built-in SPI ExpressLRS 2.4GHz receiver; Built-in 5V 1A BECFlight controller; Firmware target: CRAZYBEEF4SX1280. Onboard 4in1 ESC: MCU upgraded to EFM8BB21; Power supply: 1S LiPo/LiPo HV; Current: 5A continuous peak 6A (3 seconds); Support BLHeliSuite programmable; Factory firmware: O_H_5_REV16_7.HEX; Default protocol: DSHOT300. Onboard SPI ExpressLRS 2.4GHz Receiver: Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz; RF Frequency: 2.4GHz; Antenna : SMD antenna; Telemetry output Power: <12dBm; Receiver protocol to flight controller: CRSF; Could bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest. Onboard 5.8g VTX: Output power: 25mw~200mw switchable; Frequency: 40CH; Input voltage: 3.3V 5.5V; Current consumption: 300mA(type); Frequency: 5.8GHz 5bands 40 channels; With Race band; Smartaudio ready. Caddx ANT 1200tvl camera: Image Sensor: 1/3' CMOS Sensor; Horizontal Resolution: 1200 TVL; TV System: NTSC or PAL; IMAGE: 16:9 or 4:3; Synchronization: Internal; Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000; S/N Ratio : >52dB (AGC OFF); Video Output: CVBS; Lens: 1.8mm; Min. Illumination: 0.001LuxatF1.2; Auto Gain Control: YES; BLC: YES; WDR: Global WDR; DNR: 3D DNR; Dimensions: 14*14mm(with bracket to 19*19mm); Wide Power Input: DC 3.7-18V; Work Temperature: -20℃~+60℃; Weight: 2g (N.W.). Recommend Lipo Battery: ( NOT Included) 1S 450mah / 650mah / 660mah / 720mah battery PH2.0 Plug. Package Included: 1x Frame and canopy; 1x ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver; 4x EX1202.5 KV11500 brushless motor; 1x Gemfan 75mm bi-blade Propellers(4cw+4ccw); 1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera; 1x 5.
